热线电话：主营：AATCC,SDC,JAMESH,标准品
发布时间：2020-01-10 07:52:01
| Product Application(应用范围): PROS***E(Industrial Use Protection Film)(工业用保护膜) | |||||||
| Model / Type (种类) | Model No.(型号) | Base Film(基材)(PET) | Pressure Sensitive Adhesive (粘着层) | Liner(离型膜)(PET) | Adhesion Strength -(PET)(粘着力 对PET) | Anti-Static(防静电) (Ω/□） |
Features(特点) |
| Low Tack (微粘着) | 75LS | 75μｍ | 7μｍ | 25μｍ | 0.07 N/25mm | — | Re-Adherable, Anti-static(再剥离 防静电) |
| 「EP」 | 50LS | 50μｍ | 7μｍ | 25μｍ | 0.07 N/25mm | — | Re-Adherable, Anti-static(再剥离 防静电) |
| 25LS | 5μｍ | 7μｍ | 25μｍ | 0.07 N/25mm | — | Re-Adherable, Anti-static(再剥离 防静电) | |
| 75MS | 75μｍ | 10μｍ | 25μｍ | 0.19 N/25mm | — | Mid-Low Tack, Re-Adherable, Antistatic(再剥离 防静电) | |
| Adhesion stronger than LS(粘着力比LS强) | |||||||
| Low Tack/Heat resistance(耐热微粘着) | 25THS | 25μｍ | 2.5μｍ | 25μｍ | 0.07 N/25mm | 2.28×109 | Re-Adherable, Anti-Static(再剥离 防静电) |
| 「RC」 | Heat Resistance(耐热性) | ||||||
| UV Deactivating(UV易剥离) | 100UV | 100μｍ | 25μｍ | 25μｍ | 17 N/25mm | — | UV deactivates adhesion(UV易剥离) |
| 「UV」 | After UV exposure 0.1N/25mm or less(紫外线照射后为)(0.1N/25mm以下) | High-tack before UV exposure(初期强粘着力) | |||||
| Low Tack(微粘着) | 12CBTS | 12μｍ | .5μｍ | 25μｍ | 1.2 N/25mm | 9.5×109 | Re-Adherable, Anti-static(再剥离 防静电) |
| 「CB」 | 25CBTS | 25μｍ | 2.5μｍ | 25μｍ | 0.3 N/25mm | 9.5×109 | Re-Adherable, Anti-static(再剥离 防静电) |
| 50CBTS | 50μｍ | 2.5μｍ | 25μｍ | 0.3 N/25mm | 9.5×109 | Re-Adherable, Anti-static(再剥离 防静电) | |
| 25CBFS | 25μｍ | 2.5μｍ | 25μｍ | 0.6 N/25mm | 9.5×109 | Re-Adherable, Anti-static(再剥离 防静电) | |
| Self Adhering(自动吸附) | 50SQ | 50μｍ | 20μｍ | 25μｍ | 0.01 N/25mm | 1.21×1010 | Self Adhering, Anti-static(自动吸附 防静电) |
| 「SQ」 | 50SQD | 50μｍ | 20μｍ | 50μｍ | 0.01 N/25mm | 1.21×1010 | Self Adhering, Anti-static(自动吸附 防静电) |
| ※The table shows typical test results and does not guarantee material value. 以上均为测定值，而非保证值。 | |||||||
| AdhesionForce(粘着力): | ||||||
| Object(粘附体) | SUS(不锈钢) | PET(聚酯) | Glass(玻璃) | Acrylic Board(丙烯板) | LSE/BC Side(面) | Copper Foil(铜箔) |
| EP(75LS) | 0.02 | 0.07 | 0.05 | 0.06 | 0.03 | — |
| EP(75MS) | 0.11 | 0.19 | 0.17 | 0.23 | 0.08 | — |
| RC(25THS) | Initial(初期) 0.04 | Initial(初期) 0.07 | Initial (初期) 0.06 | — | — | — |
| After Heated(加热后) 0.09 | After Heated(加热后) 0.11 | After Heated (加热后) 0.10 | — | — | — | |
| UV(100UV) | Initial(初期) 28 | Initial(初期) 17 | Initial(初期) 29 | — | — | Initial (初期) 24 |
| After UV (UV照射后)＜0.1 | After UV (UV照射后)＜0.1 | After UV (UV照射后)＜0.1 | — | — | After UV (UV照射后)＜0.1 | |
| 12CBTS | 0.5 | 1.2 | — | — | — | — |
| 25CBTS | 0.2 | 0.3 | — | — | — | — |
| 50CBTS | 0.2 | 0.3 | — | — | — | — |
| 25CBFS | 0.3 | 0.6 | — | — | — | — |
| Object(粘附体) | PROS***E 50SQ/50SQD | ||
| PET (聚酯膜) | Acrylic Board(丙烯板) | Glass(玻璃) | |
| 23℃/50%RH | 0.01 | 0.01 | 0.02 |
| 60℃/90%RH | 0.01 | 0.02 | 0.05 |
| 80℃ | 0.01 | 0.01 | 0.05 |
| -20℃ | 0.01 | 0.01 | 0.02 |
| ※Adhesion Unit (粘着力单位为)：N/25mm。 ※Peel from Pros***e side at 300m/min, 180°angle (薄膜粘着面以300mm/min 180°的条件剥离时的测定值。) ※LSE is one of KIMOTO Diffusion Film on BC side is Back Coat side. (LSE为本公司扩散膜的产品名称，BC为背面。) ※RC(25THS) After 150°C/30min Test result (RC(25THS)加热后粘着力是在150℃?30分加热条件下所测定的数值)。 ※UV(100UV) UV Exposure 400mJ/cm2 (UV照射量为400mJ/cm2) ※The table shows typical test results and does not guarantee material value(所有的数值皆为样品测定值，而非保证值。) |
|||
| Adhesive Transfer (残胶测试): | |||
| Object(粘附体) | 50SQ/50SQD | ||
| PET(聚酯膜) | Acrylic Board (丙烯板) | Glass(玻璃) | |
| 23℃/50%RH | ○ | ○ | ○ |
| 60℃/90%RH | ○ | ○ | ○ |
| 80℃ | ○ | ○ | ○ |
| -20℃ | ○ | ○ | ○ |
| ○…No Adhesive Residue (表示无残胶) ※Visual Inspection after 250hours (250hr后目测结果) |
|||
| Chemical Resistance(耐酸碱性) | ||||||||
| Dipping Pros***e SQ applied with PET(与PET贴合后浸泡) | Dipping Pros***e SQ Only(单独浸泡) | |||||||
| Pros***e SQ | Other Brqand (其他同类产品) | Pros***e SQ | Other Brand (其他同类产品) | |||||
| 5 min(分钟) | 1 Hr(小时) | 5 min(分钟) | 1 Hr(小时) | 5 min(分钟) | 1 Hr(小时) | min(分钟) | 1 Hr(小时) | |
| 10%HCI | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ |
| 5%NaOH | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ |
| Ethanol (乙醇) | ○ | ○ | ○ | ○ | ○ | ○ | × | × |
| Ethyl Acetate (醋酸***) | ○ | ○ | △ | × | ○ | ○ | × | × |
| Hexane (***) | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ |
| MEK | ○ | ○ | △ | × | ○ | ○ | × | × |
| Toulene (***) | ○ | △ | × | × | ○ | △ | × | × |
| Benzine (***) | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ |
| Water (水) | ○ | ○ | ○ | ○ | ○ | |||
免责声明：以上信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，产品网对此不承担任何责任。产品网不涉及用户间因交易而产生的法律关系及法律纠纷， 纠纷由您自行协商解决。
风险提醒：本网站仅作为用户寻找交易对象，就货物和服务的交易进行协商，以及获取各类与贸易相关的服务信息的平台。为避免产生购买风险，建议您在购买相关产品前务必 确认供应商资质及产品质量。过低的价格、夸张的描述、私人银行账户等都有可能是虚假信息，请采购商谨慎对待，谨防欺诈，对于任何付款行为请您慎重抉择！如您遇到欺诈 等不诚信行为，请您立即与产品网联系，如查证属实，产品网会对该企业商铺做注销处理，但产品网不对您因此造成的损失承担责任！
联系：304108043@qq.com是处理侵权投诉的专用邮箱，在您的合法权益受到侵害时，欢迎您向该邮箱发送邮件，我们会在3个工作日内给您答复，感谢您对我们的关注与支持！
厦门良厦贸易有限公司 电话： 传真： 联系人：
地址： 主营产品：AATCC,SDC,JAMESH,标准品
Copyright © 2025 版权所有: 产品网
免责声明：以上所展示的信息由企业自行提供，内容的真实性、准确性和合法性由发布企业负责。产品网对此不承担任何保证责任。
您好，欢迎莅临，欢迎咨询...
